PRODUCTS

NICHROME

FECRAL

NICHROME WITH INSULATION

TITANIUM

TUNGSTEN

MOLYBDENUM

COBALT

THERMOCOUPLES

HEAT-RESISTING THERMOCOUPLES

NICKEL

MONEL

CONSTANTAN

CUPRONICKEL

HARD ALLOYS

METAL POWDERS

STAINLESS STEEL

HEAT-RESISTANT ALLOYS

FERROALLOYS

TIN

TANTALUM

NIOBIUM

VANADIUM

CHROMIUM

RHENIUM

PRECISION ALLOYS

ZIRCONIUM


 
Attention! If you found an error on the site please select it and press Ctrl + Enter.

 

+7 (495) 366-00-24 logo
+7 (495) 366-00-24
e-mail: metoteh@gmail.com

Tantalum wire and filament

Calculate tantalum product weight

Calculator "Metals and alloys". Tantalum


Wire Tube Rod Tape Strip Sheet Hexahedron Corner Rectangle

Help

Result:
Result:

Density: g/cm³
Thickness, mm
Side 1, mm
Side 2, mm
Width, mm
Ø, mm
Wall, mm
Length
Weight

R E S E T


The most highly-demanded tantalum property is refractoriness and gas-absorption ability. Very often this metal is irreplaceable in vacuum-tube and electronics. Considering the small-sized components of the devices used in the above-mentioned industries the wire and filament form factor is perfectly suitable.

Metotechnics sells tantalum wire and filament. We offer a wide range of products. They can be ordered in a special form on the prices, via e-mail or by phone.

See the corresponding sections of this page for properties, applications and grades of round and small-diameter Ta products.

Grades

The products are made of T tantalum. This grade includes tantalum (Ta) and niobium (Nb) as the main elements - 99.375% and 0,5% correspondingly so as admixtures such as iron (Fe) - 0.03%; titanium (Ti) - 0,01%; silicon (Si) - 0,005%; molybdenum (Mo) - 0,03%; tungsten (W) - 0,05%.

The chemical composition of the described grades is given in TC 11-77 SU0.021.032 TC standard.

Production

Tantalum wire and filament are made by drawing. They are made of rods. Technological operations are made without heating the blanks. Before drawing semi-finished products are lubricated. This process is performed with low deformation speed, small reduction per pass and frequent process annealing.

Ready-made products are supplied in unnannealed form. The product diameter is 0.05-1.60 mm. Wire with Ø 0.3 mm and less is reeled in, wire of large diameter is wound into bundles.

Tantalum wire and filament properties (sizes, extreme tolerances, supply condition and other technological parameters) are regulated by TC 11-77 SU0.021.032 TC standard.

Application

The main tantalum wire application is producing components of vacuum-tube devices. They include grids and anodes of oscillator tubes, directly- and indirectly-heated cathodes, springs and other small-sized components. Tantalum application in this sphere is determined by its high melting temperature, gas-absorption ability and high emission ability.

Another important application of tantalum wire and filament is medicine. Ta does not affect human tissues so this allows using tantalum products in anaplastic and traumatic surgery.

Prices

The price, product range and availability of tantalum wire and filament is given on Cost page. Also the products can be ordered on the website.

"Metotechnics"
e-mail: metoteh@gmail.com

Tel:
+7 (495) 366-00-24

Nichrome :: Fecral :: Nichrome with insulation :: Titanium :: Tungsten :: Molybdenum :: Cobalt :: Thermocouples :: Heat-resisting thermocouples :: Nickel :: Monel :: Constantan :: Cupronickel :: Hard alloys :: Metal powders :: Stainless steel :: Heat-resistant alloys :: Ferroalloys :: Tin :: Tantalum :: Niobium :: Vanadium :: Chromium :: Rhenium :: Precision alloys :: Zirconium