PRODUCTS

NICHROME

FECRAL

NICHROME WITH INSULATION

TITANIUM

TUNGSTEN

MOLYBDENUM

COBALT

THERMOCOUPLES

HEAT-RESISTING THERMOCOUPLES

NICKEL

MONEL

CONSTANTAN

CUPRONICKEL

HARD ALLOYS

METAL POWDERS

STAINLESS STEEL

HEAT-RESISTANT ALLOYS

FERROALLOYS

TIN

TANTALUM

NIOBIUM

VANADIUM

CHROMIUM

RHENIUM

PRECISION ALLOYS

ZIRCONIUM


 
Attention! If you found an error on the site please select it and press Ctrl + Enter.

 

+7 (495) 366-00-24 logo
+7 (495) 366-00-24
e-mail: metoteh@gmail.com

Monel rod and round bar

Calculate the mass of monel products

Calculator "Metals and alloys". Monel


Wire Tube Rod Tape Strip Sheet Hexahedron Corner Rectangle

Help

Result:
Result:

Density: g/cm³
Thickness, mm
Side 1, mm
Side 2, mm
Width, mm
Ø, mm
Wall, mm
Length
Weight

R E S E T


The large size range of round section products allows to provide various areas of industrial production with corrosion-resistant material. Monel rods and round bars are actively used in pumping equipment, fittings and other elements of pipeline systems.

In the company Metotechnics you can buy monel rod and round bar. Just call the phone, send a request by email or make an order via the website on the page with the price list.

A detailed description of the production methods of these products, grades and recommendations for use are presented on this page in the appropriate sections.

Grades

Products are made from the grades NiCuFeMn 28-2, 5-1, 5, NiCu-40А, Monel 400, K-500, R-405.

The main components of these alloys are nickel + cobalt (Ni + Co), and cuprum (Cu). Depending on the specific grade, the quantity of any item may differ.

NiCuFeMn 28-2, 5-1, 5 has the following percentage ratio of substances: nickel + cobalt (Ni + Co) - at least 65.8%, cuprum (Cu) - 27-29%, ferrum (Fe) - 2-3%, manganese (Mn) - 1.2-1.8%. Some impurities are detected in the composition of the material.

The composition of NiCu-40A includes at least 58.8% of nickel + cobalt (Ni + Co), 39-41% of cuprum (Cu) and some impurities.

Monel 400 contains at least 63% of Nickel (Ni), 28-34% of Cuprum (Cu), as well as Manganese (Mn) - a maximum of 2%, ferrum (Fe) - 1.0-2.5% and some impurities.

The chemical composition of the alloy NiCuFeMn 28-2, 5-1, 5 is regulated by the standard GOST 492-2006, NiCu-40A - by technical conditions 48-21-85-85, Monel 400 - by the standards of the company Special Metals Corporation (USA), which has the rights to the trademark MONEL.

Production

Monel rod is produced using technological operations of hot rolling, broaching or forging (from NiCuFeMn 28-2,5-1,5). Pressing or forging operations (from NM-40A) are also used.

Rods from monel metal of small and medium diameter (5-40 mm) are obtained with broaching operation, rods of medium diameter (16-35 mm) - with pressing operation, rods of medium and large diameter (35-140 mm or more) with rolling and forging operation.

Drawn monel rods can be soft (annealed) or hard (not annealed); rolled, pressed and forged are made in a solid state.

The sizes, mechanical properties, and delivery status of products made of NiCuFeMn 28-2,5-1,5 alloy are regulated by GOST 1525-91, technical conditions 48-21-145-72; made of NiCu-40A - by technical conditions 48-21-85-85; made of Monel 400 - by the standards of Special Metals Corporation (USA), which has the rights to the MONEL trademark.

Very often, a round section workpiece is called a monel round bar. This is true for products with a fairly large diameter. For example, monel round bars Ø 80 mm, 90 mm, 100 mm or more. GOST 25501-82 does not contain such definition for workpieces and semi-finished products, but in practice it is often used.

Application

Monel round bar and rod have found application in industries that have high requirements for the corrosion resistance of products. These areas are the most typical: electrovacuum mechanical engineering, special mechanical engineering, shipbuilding, oil and chemical industry. The described products are used for the production of pumping equipment, shafts, valves and other parts that have direct contact with aggressive substances.

Prices

The range of semi-finished products of round section (sizes, grades), as well as prices for monel rods and round bars are presented in the Cost page.

"Metotechnics"
e-mail: metoteh@gmail.com

Tel:
+7 (495) 366-00-24

Nichrome :: Fecral :: Nichrome with insulation :: Titanium :: Tungsten :: Molybdenum :: Cobalt :: Thermocouples :: Heat-resisting thermocouples :: Nickel :: Monel :: Constantan :: Cupronickel :: Hard alloys :: Metal powders :: Stainless steel :: Heat-resistant alloys :: Ferroalloys :: Tin :: Tantalum :: Niobium :: Vanadium :: Chromium :: Rhenium :: Precision alloys :: Zirconium