Metotechnics company offers non-ferrous metals and alloys so as makes products of them. The company has been successfully working on this market since 1999 and supplies both standard rolled products (rods, wire, sheets etc.) and customizable processable goods (heat screens, heaters, high-temperature wire, instruments etc.)(also according to customer’s drawings).
Precision alloy of chromium, nickel, titanium and aluminium with high resistance and maximum working temperature up to 1400 °С. CrAl 23 5 and CrAl 27 7 grades.
More details
Electric-heating cable with outer sheath that withstands temperature within 300-1200 °С. Insulation can be made of fiberglass, silicious or quartz thread. Wire grade - KENV.
A silver-white metal with low density and weight, high mechanical strength, corrosive resistance and high temperature strength. The most widely-used grades are VT1-0, VT1-00, ОТ4 and ОТ4-1.
More details
Filament, wire, rod, sheet, slab, foil, pipe, screw. Used as a construction material in aircraft, rocket engineering, shipbuilding and medicine.
More details
Standards
GOST 19807-91 Titanium and deformable titanium alloys. Grades
GOST 22178-76 Sheets made of titanium and titanium alloys. Technical conditions
GOST 24890-81 Welded pipes made of titanium and titanium alloys. Technical conditions
Filament, wire, rod, electrode, sheet, flat bar, powder, billet. Used for making nonconsumable welding rods, filament lamps, heaters of high-temperature electric furnaces, electrodes of high-temperature thermocouples, heat screens.
More details
Standards
GOST 19671-91 Tungsten wire for light sources. Technical conditions
Filament, wire, rod, sheet, foil, pipe, powder, billet. Used for producing heaters of high-temperature electric furnaces, electrodes of high-temperature thermocouples, heat screens. Also it is used as an alloying agent in the process of producing cast iron, steel and other alloys improving their properties.
More details
Standards
GOST 27266-87 Molybdenum wire for light sources. Technical conditions
Silver-white metal with a sight yellow tone and pinkish or blueish hue. It is very wear-resistant, has a high corrosion stability, is resistant to degaussing and is heatproof. PK-1u, K1Au, K0 are the most widely-used grades.
More details
Powder, ingots, plates. Applied for producing hard alloys, instrument steel and alloys so as permanent magnets. Also it is used for applying wear-resistant coatings.
More details
Materials for making thermocouples. The most common types are chromel T, alumel and copel. Grades: NiCr 9,5, NiCuMnAlCu 2-2-1, NiCuMn 43-0,5
More details
Single- or double-core cable with cores made of thermocouple alloys such as chromel T, alumel and copel and the insulation is made of heat-resistant materials.
Silver-white metal with high corrosive stability in many aggressive environments, high melting temperature, plasticity. The most common grades are NP2, N-1u, NPA1, PNE, PNK-UT3.
More details
Filament, wire, rod, sheet, strip, flat bar, cathode, anode, pipe, powder. Used as an alloying agent for corrosive resistant alloys and for applying protective coatings.
More details
Standards
GOST 492-2006 Pressurized nickel, nickel and copper-nickel alloys. Grades
GOST 6235-91 Nickel sheets and flat bars. Technical conditions
A copper-nickel alloy with a high corrosive resistance, high ultimate tensile strength and good plasticity. NiCuFeMn 28-2,5-1,5, NM-40A, Monel 400 are the most widely-used grades.
More details
Filament, wire, rod, sheet, pipe. Applied as a construction material in chemical, petroleum, shipbuilding, medical industry and equipment engineering for protection from corrosion.
More details
Silver copper-nickel alloys with high corrosive stability (especially in fresh and salty water) and good technological properties. CuNiFeMn 30-1-1 and CuNi19 are the most common grades.
More details
Alloys of tungsten and cobalt, titanium, tungsten, and cobalt, titanium, tantalum, tungsten and cobalt with high hardness and wear-resistance. WC6, WC8, T30C4, TТ14C8, ТТ11C8B.
More details
Alloys of iron with different metals with useful properties such as refractoriness, mechanical strength, hardness, corrosive stability, high-temperature strength, heat resistance, etc. FW ferrotungsten, FM ferromolybdenum, FNb ferroniobium, FV ferrovanadium, FNi ferronickel, FT ferrotitanium, etc. are the most widely-used grades.
More details
Silver-white metal with a glossy surface, high plasticity and good forgeability. Belongs to light metals. OVCh-000, O1, O2, O3 and O4 are the most common grades.
More details
Blank, anode, rod, wire. Used for applying corrosive-resistant coatings and as a connection material in soldering components of electronic devices.
More details
Glossy silver-white refractory metal with a high melting temperature, mechanical strength and hardness. T and TVCh are the most common grades.
More details
Filament, wire, rod, sheet, strip, foil, pipe, powder. Used in electronics for producing condensers, in medicine - as a prosthetic material, in chemical industry - as a construction corrosive-stable material.
More details
Metal with a silver tone. It has good mechanical and technological properties. VEL-1, VEL-2, VEL-3,VnM-1, VnM-2, VV-8 are the most widely-used grades.
More details
Filament, wire, rod, ingot, sheet, powder. Used in metallurgy for steel alloying and alloy building, in chemical industry - for producing catalysts and pigments.
More details
Dense silver-white transition refractory metal. Has a high density, melting temperature and specific resistance. Re-0, Re-1, MR-47, VR-5, VR-20, VR-27, MVR are the most widely-used grades.
More details
The offered products are stored at the warehouse; average shipment time - 1-2 business days. In case of ordering items that are not available at the warehouse, we make all efforts to supply them as soon as possible.
We offer high-quality certified products that comply with international standards.
Metotechnics company co-operates both with large plants and small industrial firms. Many scientific organizations are also our customers. Our partners receive high-quality products as soon as practicable. The long experience of our employees allows them to provide professional consultations on issues related to non-ferrous metals and alloys. The website contains many informative articles (articles) and calculators (rolled products calculator and heater calculator)that make the process of choosing the required items easier.
Please contact us by phone, via e-mail or a contact form (contacts). We are always glad to meet new partners and we cherish the old ones!